Filter
Top Products
Chapter 3: Web Interface
Fig.47 Add Time Server dialog box
Time Zone (Relative to GMT)
Select the appropriate time zone. Click Apply to save changes.
System Time (yyyy/mm/dd hh:mm:ss)
This section is to manually set WebCAM System Time. The format is
pre-determined to: yyyy/mm/dd hh:mm:ss (in 24hr format). Click Manual
Adjust to save the changes.
ii. System Restart
Fig.48 Auto Restart setting
Auto Restart System Every …
The Administrator can choose to restart WebCAM at certain intervals (choose
between minutes and hours only). Click Apply to save any changes.
Manual Restart
Click Restart Now to restart the system immediately.
iii. LED Settings
Fig.49 LED Settings
LED function
This function is not applicable.
iv. SNMP Settings
WebCAM - user manual -39-