AGFA DC-630 Digital Camera User Manual


 
- 41 -
File Naming
File name begins with “DSCI” and are followed by a 4-digit number that increases in
sequence. File numbering starts from 0001 when a new folder is created.
If the highest folder number is 999 and highest file number exceeds 9999, the camera will
display the warning message “Folder cannot be created”. When it appears, try one of the
following ways:
Reset the file number and plug in a new memory card.
The folder number and file number are initialized and renumbered from 100 and 0001
respectively.
Setting the TV Out
Your camera can be connected to a TV allowing you to preview images and movie clips on the
television screen. TV Out should be set to either NTSC or PAL depending on your region.
Option Description
NTSC America, Japan, Taiwan, Korea
PAL All of Europe
Setting USB Port
You can set USB mode to connect the camera with a printer or computer.
Option Description
Computer To connect your camera to a PC.
Printer To connect your camera to a printer.
NOTE:
Do not change the folder and file names in the memory card using your computer. It may
be unable to playback the data using the digital camera.