Filter
Top Products
The most important features of the JKW-IP Program window are: (See Operations on pages 6 & 7 for details)
1. The [PC Setting] button (below OFF button), with PC specific volume level controls, configuring basic
program responses to events and enables automatic recording of video and audio.
2. The [Settings] button (lower right), which launches the web interface for a selected adaptor. Use this
to configure an adaptor’s network settings, download an Encryption Key, or update the email address
it sends alerts to.
3. The right-click drop down menu, which allows you register the adaptor to tell the software how to
find it, or match an Encryption Key (downloaded from Settings) to enable the door release feature.
4. The Message display will communicate important events and the adaptor ID involved.
5. The Status display will communicate the status of each adaptor from the computer’s point of view.
6. The Adaptor display contains a list all connected adaptors currently registered with the computer
running the JKW-IP software.
Pg. 3
4
1 2
Step 1: Determine desired network settings for adaptors and complete the Configuration Table.
Use the Configuration Table (see page 8) to help gather information about the network and acquire an IP
address and appropriate subnet mask for each adaptor, and any changes to the default gateway (default
192.168.0.30), web port (default 443), and connection port (default 5060) that must be made before
connecting to the network (in most networks those defaults are fine).
Since the default subnet mask for the adaptor is 255.255.255.0, you will need to set your
computer’s IP address to 192.168.0.100 (or any other valid Host address for that subnet) and the subnet
mask to 255.255.255.0 and disable all firewalls before proceeding to step 2.
4 BASIC OPERATIONS AND TERMINOLOGY
5 INSTALLATION
Figure 1: JKW-IP Program window
36
5