EQUIPMENT MODIFICATION CAUTION
Equipment changes or modifications not expressly approved by Sensormatic Electronics Corporation, the
party responsible for FCC compliance, could void the user's authority to operate the equipment and could
create a hazardous condition.
FCC COMPLIANCE
This equipment has been tested and complies with the limits for a Class A digital device, according to
Part 15 of the FCC Rules. These limits provide reasonable protection against harmful interference when
the equipment operates in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy, and, if not installed and used according to these instructions, may cause harmful
interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference. If this equipment
is used in a residential area, users must correct the interference at their own expense.
LIMITED RIGHTS NOTICE
For units of the Department of Defense, all documentation and manuals were developed at private
expense and no part of it was developed using Government Funds. The restrictions governing the use and
disclosure of technical data marked with this legend are set forth in the definition of "limited rights" in
paragraph (a) (15) of the clause of DFARS 252.227.7013. Unpublished - rights reserved under the
Copyright Laws of the United States.
SOFTWARE LICENSE AGREEMENT
A Software License Agreement appears in Appendix S of this manual. Please read it carefully. Using the
SpeedDome Ultra VII Camera Dome Configuration Utility software indicates that you accept the terms
and conditions of this agreement.
NOTICE
The information in this manual was current when published. The manufacturer reserves the right to revise
and improve its products. All specifications are therefore subject to change without notice.
© Copyright 2003 Sensormatic Electronics Corporation
Under copyright laws, the contents of this manual may not be copied, photocopied, reproduced, translated
or reduced to any electronic medium or machine-readable form, in whole or in part, without prior written
consent of Sensormatic Electronics.
American Dynamics and SpeedDome are trademarks or registered trademarks of Sensormatic Electronics
Corporation. Product names mentioned herein may be trademarks or registered trademarks of other
companies.
Thank you for using American Dynamics products. We support our products through an extensive and
worldwide network of dealers. The dealer, through whom you originally purchased this product, is your
point of contact if you have a need for service or support. Our dealers are fully empowered to provide the
very best in customer service and support. Dealers should contact American Dynamics at (800) 507-6268
or (561) 912-6259, or on the web at www.americandynamics.net.
PN-8200-0184-04, Rev. D (03/2004 - BSL)