Filter
Top Products
SPEEDDOME ULTRA VIIE DAY/NIGHT CAMERA DOME CONFIGURATION UTILITY 8200-0184-12, REV. A
OPERATOR’S MANUAL SUPPLEMENT
12 of 15
AD2050
Supported Protocol RS-422
1
Maximum Presets 16
2
Maximum Patterns
3
16
DirectSet Menu Not supported
Address Range 1-1024
4
Notes:
(1) Requires the AD2083-02 series code converter.
(2) Preset information is stored at the converter, not the
dome.
(3) Patterns are limited by time and the number of
available dome commands.
(4) Requires additional equipment to achieve these
numbers. A dome address within each group of 64
or 99 cameras is reserved as a global broadcast
address.
MegaPower LT
Supported Protocol SensorNet UTC
Maximum Presets 96 96
Maximum Patterns
1
16 16
DirectSet Menu Yes
2
Yes
2
Address Range 1-99 1-99
Notes:
(1) Patterns are limited by time and the number of
available dome commands.
(2) Requires a compatible keyboard.
MegaPower 48
Supported Protocol SensorNet
RS-422
Manchester
Maximum Presets 96
1
64
Maximum Patterns
2
16 16
DirectSet Menu Yes
3
Yes
3
Address Range 1-48 1-48
Notes:
(1) Preset information is stored at the host, not the
dome.
(2) Patterns are limited by time and the number of
available dome commands.
(3) Requires firmware 1.07 or newer and a compatible
keyboard.
MegaPower 1024
Supported Protocol RS-422
1
Manchester
Maximum Presets 16
2
or 60
3
64
Maximum Patterns
4
16 16
DirectSet Menu Not
supported
Not
supported
Address Range 1-1024
5
1-1024
5
Notes:
(1) Requires the AD2083-02 series code converter.
(2) Preset information is stored at the converter, not the
dome.
(3) Requires AD2083-02 with firmware version 0701-
11YB-156A or newer. Preset information is stored in
the dome, not the converter.
(4) Patterns are limited by time and the number of
available dome commands.
(5) Requires additional equipment to achieve these
numbers. A dome address within each group of 64
or 99 cameras is reserved as a global broadcast
address.
ADACSNET Control Module
1
Supported Protocol USB to RS-232
Maximum Presets 96
Maximum Patterns 16
DirectSet Menu Yes
2
Address Range 1-254
Notes:
(1) Compatible with PCs running Windows® 2000 or
XP and with the Intellex system running version 3.2
or higher software.
(2) Requires USB Dome Control Utility software.