Filter
Top Products
Installing the batteries
Before you begin using your camera, you need to install its batteries. Use the
three lithium batteries that came with your camera.
1 Flip open the door to the battery compartment.
2 Insert the batteries into the camera.
3 Close the battery compartment door.
See also: Appendix B, “Battery Information.”
Arrange the ribbon under the batteries so you can use
it to pull them out when you need to replace them.
Position the – and
+
ends of each
battery as indicated on the door.
2
3
1
WARNING
Installing the batteries incorrectly may cause a fire or a
small explosion. Follow the instructions in this manual to replace
the batteries. Use only three lithium batteries or three NiCad
(nickel-cadmium) batteries. Do not mix different types of batteries
in the camera.
7
Getting Started With the QuickTake 150 Camera