Filter
Top Products
ARRIFLEX 416 Quick Guide 02/2007, Page 14
MINI
MONITOR
connectors
Integrated Video System
Video out with
data or Y–signal
Clean Video out (no
data) or C–signal
Video lens IRIS
Focus
adjustment
Flicker free
on/off button
White balance
button
Manual Gain
Control button
ENTER/INSERT
button
M/ON/OFF
switch
Up/down
adjustment
Image rotation
Left/right
adjustment
UP button
RIGHT button
LEFT button
DOWN button
M/ON/OFF switch
Make sure that the camera power is ON. Move the M/ON/OFF switch to ON (centre position).
To display a summary of all menu choices while the on-screen menu is not visible, press the M/ON/OFF switch
all the way to the left (it will spring back to the centre position when released).
To temporarily hide the on-screen menu while it is visible, press the M/ON/OFF switch all the way to the left.
This is useful to check the image while making adjustments in the on-screen menu.
White balance
Press the WB button to cycle through the fi ve white balance settings. Four of these, AUTO (AWB), INDOOR
(IND), OUTDOOR (OTD) and MANUAL (MAN) have dedicated LEDs. The fi fth setting, ONE PUSH WHITE, is
available when the ENTER/INSERT LED fl ashes.
AUTO automatic white balance.
INDOOR 3200 K when the illumination is tungsten and no colour correction fi lter is used.
OUTDOOR 5600 K when the illumination is daylight or HMI and no colour correction fi lter is used.
MANUAL manual white balance as controlled by the UP (increase blue), DOWN (decrease
blue), RIGHT (increase red) & LEFT (decrease red) buttons.
ONE PUSH WHITE user adjustable – hold a white card in front of the lens and press ENTER/INSERT.
Controlling image brightness
Open the video lens IRIS fully and use either Automatic Gain Control or Manual Gain Control to control the
image brightness. Only close the video lens IRIS if the brightness exceeds the electronic control range.