Filter
Top Products
29
4. Advance
4.1 FTP Client
Use this menu to set up for capturing and sending images to an FTP server. By using FTP
client function, you can send the image and audio file which has been shot and recorded
linked with the external sensor input or with the built-in motion detection function to FTP server.
FTP client setting menu is composed of two tabs, General, Alarm sending and Periodical
sending.
4.1.1 General
FTP client function：To activate the FTP client function, select On. The FTP client setting
page appears. When you do not wish to use the FTP client function, select Off.
Note：
• The frame rate and operability on the main viewer may decrease while a file is being
transmitted by the FTP client function.
FTP server name：Type the FTP server name to upload still images up to 64 characters, or
the IP address of the FTP server.
User name：Type the user name for the FTP server.
Password：Type the password for the FTP server.