Filter
Top Products
31
4.1.2 Alarm sending
Set to forward the image and audio file to the specified FTP server linked with the alarm
detection by the external sensor input or by the built-in motion detection function. Select On to
send the image and audio file to FTP server linked with the alarm detection.
Remote path：Type the path to the destination in FTP server up to 64 characters.
Image file name：Type the file name you want to assign to the images when sending to the
FTP server. You can use up to 10 alphanumeric characters, - (hyphen) and _ (underscore) for
naming.
Suffix：Select a suffix to add to the file name:
Date & time: The date & time suffix is added to the Image file name. The date/time suffix
consists of lower two-digits of year (2 digits), month (2 digits), date (2 digits), hour (2
digits), minute (2 digits), second (2 digits), and consecutive number (2 digits), thus
14-digit number is added to the file name.
Sequence number: A consecutive number of 10 digits between 0000000001 and
4294967295 and two fixed digits 00 is added to the Image file name.
Motion Detection：Click it on for using Motion Detection function as a sensor. You can set
the motion detection function page.
Note：
• Motion Detection works only when the Video mode is set to MPEG4 and the
Cropping is set to Off.