Avaya LU250WAMP Camera Lens User Manual


 
Page 12 of 12
MUSIC VOLUME This control adjusts the level of the background music output. No reference level
setting position is provided. The background music level should be set to an
acceptable level without overdriving the system. When adjusting this level,the PEAK
LEVEL indicator should be observed to ensure that the amplifier signal is not
distorted.
MUSIC MUTE This control adjusts the level of the background music heard during a paging
announcement. No reference level setting position is provided. The background
music mute level should be set to the customer's satisfaction, but the page
announcement must always be easily heard above the background music.
MIC VOLUME This control adjusts the level of the microphone page output. A reference level
setting position is provided with this control. When set to this position, the output
level of the page should be about maximum. Further adjustment can be made by
observing the PEAK LEVEL indicator.
CA
UTION
: Microphone should not be placed near any paging loudspeakers.
RINGER VOLUME This control adjusts the level of the night ringer tone output. No reference level
setting position is provided. The background music level should be set to the
customer's satisfaction. When adjusting this level, the PEAK LEVEL indicator should
be used to ensure that the amplifier signal is not distorted.
APHEX This control adjusts the amount of Aphex
®Aural Exciter effect mixed in to the page
signal. No reference position is provided for this feature. To use this function, the
APHEX switch beneath the input connection cover must be set to ON. Setting this
switch to OFF bypasses the Aphex effect and makes the control inoperable.With the
APHEX switch turned on,make a page and rotate the control until the audio sounds
crisp and clear.
BASS andTREBLE Bass and treble controls are provided to adjust the high frequency and low frequency
response of the paging system. Reference positions are provided for these controls.
When set to these positions, the frequency response of the system will be flat. Set
the controls to the customer’s satisfaction. Clockwise rotation increases (boosts)
the response and counterclockwise reduces (cuts) the response. Increasing bass
and/or treble can cause output signal peaks to increase. Check the PEAK LEVEL
indicator after making bass adjustment and lower the music input volume if excess
peaking occurs.