Axis Communications 216MFD-V Digital Camera User Manual


 
31216/EN/R2/0803
©2008 Axis Communications AB. AXIS COMMUNICATIONS, AXIS, ETRAX, ARTPEC and VAPIX are registered trademarks or trademark
applications of Axis AB in various jurisdictions. All other company names and products are trademarks or registered trademarks of their
respective companies. We reserve the right to introduce modifications without notice.
www.axis.com
TECHNICAL SPECIFICATIONS - AXIS 216MFD/AXIS 216MFD-V NETWORK CAMERAS
Models
AXIS 216MFD: Tamper-resistant casing
AXIS 216MFD-V: Vandal-resistant casing
Image sensor
1/3” Micron Progressive Scan RGB CMOS 1.3 Megapixel
Lens
Fujinon 2.8 - 10 mm, F1.3, DC-iris
Focus range: 0.3 m to infinity
Angle of view
27°-100° horizontal
Camera angle
adjustment
Pan 360°, tilt 170°, rotation 340°
Minimum illumination
2 lux, F1.3
Video compression
Motion JPEG
MPEG-4 Part 2 (ISO/IEC 14496-2) with motion estimation,
Profiles: ASP and SP
Resolutions
24 resolutions from 1280x1024 to 160x90 via API
23 selections via configuration web page
Frame rate
Motion JPEG: Up to 12 fps at 1280x1024
20 fps at 1024x768*
30 fps at 800x600*
MPEG-4: Up to 8 fps at 1280x1024
13 fps at 1024x768*
20 fps at 800x600*
*Partial scan takes the data from the center region of the
sensor and scales it down to present an image at optimal
frame rate.
Video streaming
Simultaneous Motion JPEG and MPEG-4
Controllable frame rate and bandwidth
Constant and variable bit rate (MPEG-4)
Image settings
Compression levels: 100
Rotation: 0º, 180º
Mirroring
Configurable color level, brightness, sharpness, white
balance, exposure control, fine tuning of behavior at low
light
Overlay capabilities: time, date, text, image or privacy mask
Shutter time
1/15000 s to 1/4 s
Audio
Two-way (half duplex), one-way or audio off
Built-in microphone, external microphone input or line
input
Mono audio output (line level) connects to active
speaker with built-in amplifier
Audio compression:
AAC LC 8 kHz 32kbit/s
G.711 PCM 64 kbit/s
G.726 ADPCM 32 or 24 kbit/s
Security
Multiple user access levels with password protection
IP address filtering
HTTPS encryption
IEEE 802.1X network access control
User access log
Users
20 simultaneous users
Unlimited number of users using multicast (MPEG-4)
Alarm and event
management
Events triggered by video motion detection, audio
detection, active tampering alarm, external input or
according to a schedule
Image upload over FTP, email and HTTP
Notification over TCP, email, HTTP and external output
Pre- and post alarm buffer: up to 20 MB (250 images or
more, in full 1280x1024 resolution)
Connectors
RJ-45 for Ethernet 10BaseT/100BaseTX
DC jack
Terminal block for 1 alarm input and 1 output
3.5 mm jack for Mic in (max 80 mVpp) or Line mono input
(max 6.4 Vpp)
3.5 mm jack for Line mono output (max 1.3 Vpp) to active
speaker
Casing
AXIS 216MFD: Polycarbonate base and polycarbonate
transparent cover
AXIS 216MFD-V: 1000 kg (2200 lbs) impact-resistant
casing with metal base and rugged polycarbonate
transparent cover
Tamper-proof mounting on wall, hard or drop ceiling
Processors and
memory
CPU, video processing and compression: ARTPEC-A
RAM: 64 MB
Flash: 8 MB
Battery backed-up real-time clock
Power
4.9- 5.1 V DC max 3.8 W
Power over Ethernet (IEEE 802.3af) Class 1
Operating conditions
0–50 ºC (32–122 ºF)
Humidity 20-80% RH (non-condensing)
Installation,
management and
maintenance
AXIS Camera Management tool on CD, and web-based
configuration
Configuration of backup and restore
Firmware upgrades over HTTP or FTP, firmware available at
www.axis.com
Video access from
web browser
Camera live view
Video recording to file (ASF)
Sequence tour for up to 20 Axis video sources
Customizable HTML pages
Minimum
web browsing
requirements
Pentium III CPU 500 MHz or higher, or equivalent AMD
128 MB RAM
DirectX 9 compatible graphics board, Direct Draw
Windows XP, 2000, Internet Explorer 6.x or later
For other operating systems and browsers see
www.axis.com/techsup
System integration
support
Open API for application integration including VAPIX® from
Axis Communications*, AXIS Media Control SDK*, event
trigger data in video stream
Quality of Service (QoS) Layer 3, DiffServ Model
Embedded Linux operating system
* Available at www.axis.com
Supported protocols
IPv4/v6, HTTP with Digest Authentication, HTTPS, SSL/TLS*,
TCP, QoS, SNMPv1/v2c/v3 (MIB-II), RTSP, RTP, UDP, IGMP,
RTCP, SMTP, FTP, ICMP, DHCP, UPnP, Bonjour, ARP, DNS,
DynDNS, SOCKS, NTP, IEEE 802.1X. More information on
protocol usage available at www.axis.com
*This product includes software developed by the Open SSL Project
for use in the Open SSL Tool kit (www.openssl.org)
Included accessories
Power supply 5.1 V DC, mounting and connector kits,
Installation Guide, CD with User’s manual, demo software,
installation and management tools, licenses for 1 encoder
and 1 decoder, decoder software for Windows
Video management
software (not incl.)
AXIS Camera Station - Video management software for
viewing, recording and archiving up to 25 cameras
See www.axis.com/partner/adp_partners.htm for more
software applications via partners
Accessories (not incl.)
Tamper-resistant casing with smoked transparent cover
Vandal-resistant casing with smoked transparent cover
Drop ceiling mount kit (AXIS 216MFD)
Multi-user decoder license pack
Approvals
EN 55022 Class B, EN 61000-3-2, EN 61000-3-3, EN
55024, FCC Part 15 Subpart B Class B, ICES-003 Class B,
VCCI Class B, C-tick AS/NZS CISPR 22, EN 60950
Power supply: EN 60950, UL, CSA
Dimensions (HxWxD)
and weight
94 x 144 x 132 mm (3.7” x 5.7” x 5.2”)
AXIS 216MFD: 425 g (0.94 lb)
AXIS 216MFD-V: 580 g (1.28 lb)