Filter
Top Products
AXIS P3364-VE Network Camera
Video and Audio
Video and Audio
The video and audio settings can be used to optimize video and audio quality. You can congure the following:
• Video stream settings. See page 18.
• Stream proles. See page 19.
• Camera settings. See page 20.
• View area. See page 22.
• Overlay image. See page 22.
• Privacy mask. See page 24.
• Focus and zoom. See page 24.
• Audio settings. See page 25.
• Audio clips. See page 26.
Set Up Video Streams
To set up the product’s video streams, go to Video & Audio > Video Stream.
The video stream settings are divided into the following tabs:
• Image. See page 18.
• Audio. See page 25.
• H.264. See page 19.
• MJPEG. See page 19.
Image
The default image settings can be congured under Video & Audio > Video Stream. Select the Image tab.
The following settings are available:
• Resolution. Select the default resolution.
• Compression. The compression level affects the image quality, bandwidth and le size of saved images; the lower the
compression, the higher the image quality with higher bandwidth requirements and larger le sizes.
• Mirror image. If required, the image can be mirrored.
• Rotate image. If required, the image can be rotated.
• Maximum frame rate. To avoid bandwidth problems, the frame rate allowed to each viewer can be Limited to a xed
amount. Alternatively, the frame rate can be set as Unlimited, which means the Axis product always delivers the highest
frame rate possible under the current conditions.
• Overlay settings. See Overlay on page 22.
Click Save to apply the new settings.
18