Filter
Top Products
Page 10 AXIS Q8721-E Installation Guide
Attach the Base to the Bracket
1. Remove the desiccant bag, which is placed in the base.
2. Make sure the seal is in position.
3. Route the network, power and, if applicable, illuminator cables through their respective cable glands in the
base.
The cable glands are suitable for cables with a diameter of 5 mm - 10 mm. For cables with a diameter 3 mm -
7 mm, use the supplied spare gaskets.
4. Screw the cable gland caps on firmly.
It is important to tighten the cable gland caps in order to maintain the products IP rating.
3
3
2
1
1
6 7 8
54
2
1 Base 5 Column bracket
2 Network, power and
illuminator cables
6 Power cable (24 V AC)
7 Illuminator cable
3 Seal 8 Network cable
4 Wall bracket