Filter
Top Products
Page 18 AXIS Q8721-E Installation Guide
Access the Video Stream
Use the tools provided on the Installation and Management Software CD to assign an IP address, set the password
and access the video stream. This information is also available from the support pages on www.axis.com/techsup
Focus Adjustment - AXIS Q1921
If required, follow these instructions to focus the thermal network camera:
1. Unscrew the stop screw on the lens, using a slotted screwdriver 1.8 mm.
2. Focus the camera to the appropriate distance. See the table below for recommended focus distances for
achieving optimal focus both for near focus and infinity.
3. Secure the stop screw.
The network camera has a lens with autofocus and cannot be adjusted manually.
Lens 10 mm 19 mm 35 mm 60 mm
Focus distance
2 m (6.6 ft.) 8 m (26.2 ft.) 22 m (72.2 ft.) 60 m (196.9 ft.)
Stop screw