Filter
Top Products
AXIS M1054 Network Camera
Technical Specifications
Function/group
Item
Specications
Casing
Rear cover: Aluminium
Front cover: Polycarbonate
Memory 128 MB RAM, 128 MB Flash
Power
4.9-5.1 V DC, max. 6.5 W
Power over Ethernet IEEE 802.3af/IEEE 802.3at Type 1 Class 2 (max. 6.49 W)
Connectors DC jack
RJ45 10BASE-T/100BASE-TX
Terminal blocks with power output, 1 alarm input and 1 output
Edge storage
Support for recording to network share (Network Attached Storage or le server)
For NAS recommendations see www.axis.com
PIR sensor
Passive infrared (PIR) motion sensor with congurable sensitivity. Max. range: 6 m
(19.7 ft)
Illumination LED
White illumination LED: 1 W, Class 1M
Operating
conditions
Temperature: 0 ºC to 40 ºC (32 ºF to 104 ºF)
Humidity 20–80% RH (non-condensing)
Approvals
EN 55022 Class B, EN 61000-3-2, EN 61000-3-3, EN 55024, FCC Part 15 Subpart B Class
B, ICES-003 Class B, VCCI Class B, C-tick CISPR 22, KCC Class B, IEC/EN 60950-1
Power supply: EN 60950-1, cCSAus
Dimensions
(HxWxD)
95 x 59 x 41 mm (3.8 x 2.3 x 1.6 in)
Weight
156 g (0.34 lb)
Included
accessories
Power supply, stand and clamp, Installation Guide, CD with installation tools, recording
software and User Manual, Windows decoder 1-user license, extension for stand: 100
mm (4.0 in)
Video
management
software (not
included)
AXIS Camera Companion (included), AXIS Camera Station and video management
software from Axis’ Application Development Partners (not included). For more
information, see www.axis.com/products/video/software
General
Optional
accessories
AXIS T8412 Installation Display, AXIS Mobile Monitor
Connectors
I/O Connector
4-pin terminal block for:
• Auxiliary power (DC output)
• Digital Input
• Digital Output
• 0 V DC (-)
1 2 3 4
Function Pin Notes
Specications
0 V DC (-)
1
0 V DC
DC output
2
Can be used to power auxiliary equipment.
Note: This pin can only be used as power out.
3.3 V DC
Max load = 50 mA
59