Filter
Top Products
Page 22 AXIS Q1602-E/AXIS Q1604-E Installation Guide
Status LED (on camera) when using the Focus Assistant
Note:
Note that this Status LED can be configured to be unlit during normal operation.
Status LED on housing (fan/heater)
Color Indication
Green Step 4: Focus Assistant is enabled
Step 6: The lens is optimally adjusted
Amber Step 4: The camera has been moved, or an object has been inserted in front of
the lens. Exit and restart the Focus Assistant.
Step 6: The lens is less optimally adjusted
Red Step 4: The camera has been moved, or an object has been inserted in front of
the lens. Exit and restart the Focus Assistant.
Step 6: The lens is poorly adjusted
Color Indication
Green OK
Flashing
green
Single flash: Heater error
Double flash: Fan error
Triple flash: General error
Note: Alarm events will be triggered through the camera’s input port. See the
User Manual, available on the CD provided with this product, or from
www.axis.com Contact your Axis reseller for information about spare parts and
troubleshooting.