Filter
Top Products
AXIS Q1931–E PT Mount Thermal Network Camera
Applications
If the Axis product is reset to factory default, installed applications and their settings are removed. For information about factory
default, see Reset to Factory Default Settings.
AXIS Cross Line Detection
The application AXIS Cross Line Detection is included in this product. AXIS Cross Line Detection is a trip-wire application which
enables the operator to congure a virtual line in the camera view. When a moving object crosses this virtual line, the event
system can be used to trigger actions.
Install Axis Application
If a factory default reset has been performed, the application license has to be downloaded from axis.com/applications. Follow
these steps:
1. Download the application from www.axis.com/applications/
2. Install the application in the Axis product.
3. To obtain the license key, register the license code (delivered with the product) and the Axis product’s serial number at
www.axis.com/applications/register.
4. Install the license key le(s) on the Axis product(s) through the product’s web pages.
Congure AXIS Cross Line Detection
The AXIS Cross Line Detection application must be congured before use. Follow these steps:
1. Navigate to Applications, select AXIS Cross Line Detection in the application list and click Start.
2. Navigate to Applications > Cross Line > Settings and click the link Cross Line Detection Settings under Application
Settings.
3. Select the number of segments from the Segments drop-down list.
28