BenQ DC E510 Digital Camera User Manual


 
BenQ DC 5530 User’s Manual
English
Using the DC E510
23
3.6 Connecting to a TV
You can connect the DC E510 to a television and view photos and movie clips on a large
screen.
Use an AV cable (optional) to connect the DC E510 to your television as illustrated below.
Your own television input jacks may differ from the illustration. Refer to your television’s
user manual for assistance.
1. Turn the camera off and connect the AV cable’s mini-plug to the camera’s Earphone
Jack/TV out port.
2. Connect the two RCA jacks to your television as illustrated above.
3. Turn the camera on. The camera image appears on the television, indicating that the TV
has been successfully connected. View the previous or next image by pressing the
Navigation button.
4. Use the DC E510’s playback functions to view photos, movie clips, etc. Refer to 3.4
“Playback Mode” on page 16 for more information.
Notes
The AV cable is optional (2.5 φ connector).
Turn the camera off before disconnecting it from the TV.
You may need to change the camera’s PAL or NTSC video format setting depending on
your region. For information, see 3.5 “Setup Mode” on page 21.
The DC E510 supports mono audio output only.
Audio
AV
Video
LR
R
Connect the yellow RCA jack to the television’s
Video In port.
Connect the white RCA jack to the television’s left or
right Audio In port.
Connect the small end of the
AV cable to the camera’s
Earphone Jack/TV out port.