Filter
Top Products
IP Camera 200 Series Installation | en 17
Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.5 | 2011.01
3.3 Network (and power) connector
Figure 3.2 Network connection
– Connect the camera to a 10/100 Base-T network.
– Use a shielded UTP Category 5e cable with RJ45
connectors.
– Power can be supplied to the camera via the Ethernet
cable compliant with the Power-over-Ethernet
(IEEE 802.3af) standard.
1 2 3 4 DC 12V Ethernet Line-out Line-in
RJ45
Ethernet
(PoE)