![](http://pdfasset.owneriq.net/d/0d/d0da2394-bfe4-4539-9f05-a4e3eb679d28/d0da2394-bfe4-4539-9f05-a4e3eb679d28-bgc.png)
12 en | Installation MicroDome Camera 200 Series
AR18-10-B012 | v1.55 | 2012.09 Installation Manual Bosch Security Systems
3 Installation
3.1 Disassembly
The camera/housing unit consists of the following parts:
To disassemble the unit proceed as follows:
1. Using the special screwdriver bit supplied, loosen the
three tamper-resistant screws in the dome (the screws
remain in place).
2. Remove the dome from the base.
Dome
Camera module and mounting base
x3