![](http://pdfasset.owneriq.net/d/0d/d0da2394-bfe4-4539-9f05-a4e3eb679d28/d0da2394-bfe4-4539-9f05-a4e3eb679d28-bge.png)
14 en | Installation MicroDome Camera 200 Series
AR18-10-B012 | v1.55 | 2012.09 Installation Manual Bosch Security Systems
3.4 Network (and power) connector
Figure 3.3 Network connection
– Connect the camera to a 10/100 Base-T network.
– Use a shielded UTP Category 5e cable with RJ45
connectors (M12 connector for PM version).
– Power can be supplied to the camera via the Ethernet
cable compliant with the Power-over-Ethernet
(IEEE 802.3af) standard.
RJ45
Ethernet (PoE)
M12
Ethernet (PoE)