Filter
Top Products
12 en | Installation IP Camera 200 Series
AM18-Q0616 | v1 | 2012.02 Installation Manual Bosch Security Systems
3 Installation
3.1 Disassembly
The camera/housing consists of the following parts:
To disassemble the unit proceed as follows:
1. Using the special screwdriver bit supplied, loosen the four
tamper-resistant screws in the dome (the screws remain in
place).
2. Remove the dome from the base.
3. Remove the inner liner by pulling it off the base.
1. Dome
2. Inner liner
3. Camera module and mounting base
x4