Filter
Top Products
14 en | Installation IP Camera 200 Series
AM18-Q0616 | v1 | 2012.02 Installation Manual Bosch Security Systems
3.3 Network (and power) connector
Figure 3.1 Network connection
– Connect the camera to a 10/100 Base-T network.
– Use a shielded UTP Category 5e cable with RJ45
connectors.
– Power can be supplied to the camera via the Ethernet
cable compliant with the Power-over-Ethernet
(IEEE 802.3af) standard.
RJ45
Ethernet (PoE)
CAUTION!
This equipment is only to be connected to PoE networks
without routing to outside plant.