Filter
Top Products
FLEXIDOME HD VR Camera configuration | en 33
Bosch Security Systems Installation Manual AM18-Q0637 | v1.1 | 2013.08
6 Camera configuration
The camera normally provides an optimal picture without the
need for further adjustments. Configuration of the camera is
carried out via the network using a web browser.
6.1 User modes
The camera has six user modes. These modes contain
optimized settings for a variety of applications. Select the mode
most suited to the camera’s function via the web browser
interface.
6.2 Day/Night switching
The camera is equipped with a motorized IR filter. The
mechanical IR filter is taken out of the optical path in low-light
applications.
The IR filter is controlled either:
– via an alarm input, or
– automatically, based on the observed light levels.
If Auto switching mode is selected, the camera automatically
switches the filter depending on the observed light level. The
switching level is programmable.
Note:
When the auto mode is selected and the switching level is set
to -15, certain borderline scene lighting conditions can cause
the camera to switch back and forth between day and night
modes. Set a different switching level to avoid this.