Bosch Appliances NIN-832 Security Camera User Manual


 
FLEXIDOME HD VR Installation | en 27
Bosch Security Systems Installation Manual AM18-Q0637 | v1.1 | 2013.08
5.6 Camera positioning and field-of-view
The camera module position can be adjusted along three axes
and several zoom positions can be selected.
To help position the camera and set the field-of-view:
1. Connect a monitor to the 2.5 mm jack using the optional
monitor cable (S1460) which provides a CVBS signal (for
installation purposes only).
2. Apply power to the camera.
3. After power-up, wait a little (about 20 seconds).
4. Press the Menu button. This stops the IP video stream and
enables the service video analog output.
FoV
S1460
CAUTION!
Do not expose the sensors to direct sunlight.