Filter
Top Products
Megapixel IP Cameras Quick Install Guide | en 2
Bosch Security Systems Quick Install Guide F.01U.032.595 | V 1.0 | 2007.03
CAUTION!
Indicates a potentially hazardous situation.
If not avoided, this may result in property damage or risk of
damage to the unit.
i
NOTICE!
This symbol indicates information or a company policy that
relates directly or indirectly to the safety of personnel or
protection of property.
!
CAUTION!
– U.S.A. models only - Section 810 of the National Electrical
Code, ANSI/NFPA No. 70, provides information regarding
proper grounding of the mount and supporting structure,
location of discharge unit, connection to ground elec-
trodes, and requirements for the grounding electrode.
– Power lines: do not locate the camera near overhead
power lines, power circuits, electrical lights, or where it
may contact such power lines, circuits, or lights.
– Operate the unit only from the type of power source indi-
cated on the label. Before proceeding, be sure to discon-
nect the power from the cable to be installed into the unit.
– For external power supplied units, use only the rec-
ommended or approved power supplies.
–For limited power source units, this power source
must comply with EN60950. Substitutions may dam-
age the unit or cause fire or shock.
– For 9-12 VDC units, voltage applied to the unit's
power input should not exceed 12.3 VDC. User-sup-
plied wiring must comply with local electrical codes
(Class 2 power levels). Do not ground the supply at
the terminals or at the unit's power supply terminals.
If unsure of the type of power supply to use, contact your
dealer or local power company.
i
NOTICE! You can view and print the full version of this
Installation Manual with Adobe Acrobat Reader, both provided
on the enclosed CD-ROM. This user guide is the intellectual
property of Bosch Security Systems; protected by copyright.