Filter
Top Products
18 en | Configuration WZ16 Integrated IR Bullet Camera
| 1.0 | 2011.02 Installation Manual Bosch Security Systems, Inc.
4 Configuration
Follow the steps below to adjust the zoom and focus. Remove
the lens cap before making adjustments, then replace it when
you finish. Refer to the figure below.
Figure 4.1 Lens adjustment
4.1 Adjusting the Zoom
1. Loosen the Zoom lock screw by turning it
counterclockwise.
2. Adjust the zoom by moving the Zoom lever to Tele side or
Wide side.
3. Turn the Zoom lock screw clockwise to tighten the focus
lever after adjustment.
Number Description
1Zoom control
2 Focus control
3 Video brightness
CAUTION!
To prevent humidity problems, the camera must be installed in
dry conditions. Removing the lens cap in a wet or humid
environment may result in condensation on the front window.