Filter
Top Products
VideoJet X40 Configuration Using a Web Browser | en 51
Bosch Security Systems Installation and Operating Manual V3.5 | 2007.12
5.18 Partitioning
Four partitions can be set up for recordings of the cameras connected to the VideoJet X40;
this is similar to the partitioning often found on computer hard drives. Parameters such as
size and type of video recording can be specified for each partition. Modifying these
parameters leads to reorganization, during which stored data is lost.
The unit requires a dedicated partition for the recordings of each connected camera. Each
partition is linked to its own encoder or camera input: camera input Video In 1 with partition
number 01, camera input Video In 2 with partition 02 etc. This assignment cannot be
modified. As a result, all numbers are always displayed in the list, regardless of whether a
corresponding partition is available or has been deleted. All four potential partitions need to
be configured in order to record four cameras.
All partitions are listed in the table on the Partitioning page together with the number of the
video input (Camera), their partition name, alarm tracks, type and size.
In addition, the page provides you with an overview of the drive data; for example total
memory and number of partitions created. A pie chart indicates how much memory space is
partitioned for recordings.