Filter
Top Products
VideoJet X40 Configuration Using a Web Browser | en 61
Bosch Security Systems Installation and Operating Manual V3.5 | 2007.12
5.21 Alarm Sources
You can configure the alarm inputs of the VideoJet X40.
5.21.1 Alarm input
Select Active high if the alarm is to be triggered by closing the contact. Select Active low if
the alarm is to be triggered by opening the contact.
5.21.2 Name
You can enter a name for each alarm input, which is then displayed below the icon for the
alarm input on the LIVEPAGE if configured correctly (see Section 5.32 Livepage Configuration,
page 85).