Filter
Top Products
CLEANING THE OUTER CASING
Please follow the instructions below to clean the outer casing of the scanner
when necessary.
1. Use a suitable dust blower to blow off the dust on the scanner.
2. Use a slightly damp cloth to wipe off any smears on the surface of the scanner.
3. Wipe the scanner with a dry, clean, lint-free cloth.
WARNING: Do not use any solvents or corrosive liquid (for example; alcohol,
kerosene, etc.) to clean any part of the scanner. Otherwise, the plastic
material will be permanently damaged.
CLEANING THE IMAGE SENSOR
1. Follow the instructions above to clean the outer casing of the scanner first.
2. With the scanner power off and disconnected from the power supply,
insert the sensor cleaning swab into one end of the output slot.
NOTE: Make sure that there is no visible dust on the swab before
inserting it into the output slot.
3. Gently slide the sensor cleaning swab to the other end of the output slot.
4. Repeat step 3 five or six times consecutively.
NOTE: Do not apply too much force on the swab.
5. Slide the sensor cleaning swab to the left end of the output slot, and then
remove it from the slot.
6. Store the sensor cleaning swab in a safe place and keep it away from dust.
19