Bushnell 11-9303 Digital Camera User Manual


 
11
Setup Guide (cont.)
Batteries typically last 30 days or more, depending on how often the Sentry is activated by events, how often the ash
res, ambient temperature, etc. The red LED lamp will stay on continually to indicate a low battery condition.
9. Pressing the Up/Down buttons during normal operation will switch the display between showing # of photos
stored (i) and # of events recorded (j). To view your captured photos, make sure the power is off, and remove the SD
card by pushing down lightly on the top edge of the card-it will pop up for removal. Insert it into an SD card reader
(available at most computer, photo, or electronics dealers) connected via USB to your PC or Mac to view, copy, or
delete the photos (standard JPG les) and movies (AVI les) inside the “DCIM/100MEDIA” folder on the card.
Double click on an individual le to see it, or open the les using the photo software of your choice. The event log is
the .TXT le, just double click to view with your default software that opens standard plain text les. If you do not
have a computer, or would like to more easily view your photos in the eld, we recommend the Bushnell Trail Scout
Viewer. It is battery powered, and features 2 SD card slots, allowing you to easily
copy photos to a larger capacity card, or delete unwanted photos, as well as view
your Sentry photos on its large color LCD display. The Trail Scout Viewer also has
a USB port, so it can function as a card reader for a computer as well.
j
i
119303 Trail Sentry manual-Engli11 11 2/13/07 12:19:07 AM