Bushnell 119445 Digital Camera User Manual


 
28 29
4. Try to avoid setting the camera up on small trees that are prone to
being moved by strong winds.
5. Remove any limbs which are right in front of the camera lens.
PIR Sensor LED Flashes/Doesn’t Flash
1. When the camera is in the “Setup” mode, a special LED on the front
of the camera will flash when it senses motion. This is for setup
purposes only and will help the user aim the camera.
2. During use, the LED will not flash when the camera takes an image.
This is to help keep the camera hidden from game.
LCD Screen Issues
1. LCD screen powers on but no text is present.
a. After moving the switch from “Off” to “Setup” or “On”, make sure
that the switch is correctly in position to ensure the proper mode
(avoid positions “between” two modes).
b. Do not move the switch directly from “On” to “Setup”-always
move the switch all the way down to “Off” first, then back up to
“Setup”.
2. LCD screen shows a faint black line after turning from “Setup” to “On”.
a. The LCD will turn off when you slide the switch to the “On”
position. In some cases, this black line will appear and then fade in
about 1 second. This is normal and the camera will function properly.
3. Screen comes on but then powers off
a. Make sure that you have installed the SD card correctly.
Camera won’t retain settings
1. Make sure that you have been saving the changes to any parameter
settings that you made while in Setup mode, by pressing “OK” after
changing the setting. If you don’t save your new setting after changing
it, the camera will continue to use the original default setting for that
parameter.
Image Sensor
5 Megapixel Color CMOS
Maximum Pixel Size
3264x2448 (8MP)
Lens
F=3.1; FOV=50°; Auto IR-Cut-Remove (at night)
IR-Flash Range
36’-45’ (12m-15m)
Display Screen
Std B&W Display: 24x32mm(1.5”) ; Color Display:
32x42mm (2”)
Memory Card
SD or SDHC Card, Maximum capacity 16GB
Internal RAM
32MB
Picture Size
8MP = 3264x2448; 5MP = 2560x1920; 3MP =
2048x1536
Video Size
720x480/30 fps, 640x480/30fps, 320x240/30fps
PIR sensitivity
PIR with 3 sensitivity levels: High/Normal/Low
Operation
Day/Night
Response Time
1s
Triggering Interval
1sec. - 60min. programmable
Shooting Numbers
1— 3 programmable
Video Length
5-60sec. programmable
Power Supply
8xAA recommended, 4xAA as emergency power
Stand-by Current
< 0.3mA(<7mAh/day)
Power Consumption
200mA (+530mA when IR-LED lighted)
User Interface
LCD display
Interface
TV out (NTSC/PAL); USB; SD card holder; 6V DC
external
Security
Strap; ¼-20 attachment
Operating
Temperature
-20 - 60°C (Storage temperature: -30 - 70°C)
Operating Humidity
5% - 90%
Security
authentication
FCC/CE/RoHs/WEEE
TECHNICAL SPECIFICATIONS