Filter
Top Products
12
2. K2 – Image Mode Switch (STILL / MOVIE):
Set K2 to either of these settings:
(UP) STILL Photo Mode: Image resolution is determined by the setting of the RES switch, and
photos are stored in JPG format.
(DOWN) MOVIE Mode: e camera can record a 15 second movie, the le format is AVI with
audio.
NOTE: On model# 119835, using MOVIE mode at night will result in dark videos, as the xenon (standard) ash
does not function in MOVIE mode. With models 119937/119907, you may use MOVIE mode at night by setting
switch K3 (Lighting mode) to the LED position (the standard ash does not function in MOVIE mode on these
models either).
(Models 119937/119907 only)
3. K3 - Flash Mode Switch (LED / Standard):
e Game camera has two modes that select which ash type will re under dark conditions:
(a) LED Mode (Infrared LED lamp array):
e IR-LED (infrared) light is invisible to the naked eye, but will provide illumination for the
camera, use it when you do not want to alert the subject at night. is mode can also be used
for nighttime movie capture. During the time dened as “Night”, an infrared blocking lter is
automatically deactivated, so that the IR light generated by the LEDs can create an image. During
the “Day”, the infrared blocking lter is re-activated; therefore, you should use the “Standard” or
xenon ash position for best results when the camera is set to “Day only” time mode.
(b) STD (Standard) Mode: (Xenon ash tube)
You can use Standard mode for twilight/cloudy conditions, or to take color still pictures at night. If
you want to use the MOVIE mode, you can not use Standard ash mode—you must set K3 to LED.
Setup Guide (cont.)
Note: see #4 in “Other Setup Notes” for additional information.
Trail Scout 2008 Models 119835+112 12 3/4/08 12:05:28 AM