Filter
Top Products
19
1. MOUNTING (Using the “T” bracket and a standard tree bracket):
Mount the trail camera on the tree as shown below.
1. Screw bracket A to the tree.
2. Bolt bracket B on the back of the trail camera.
3. Match bracket B up to bracket A.
4. en, hang bracket B over bracket A.
5. Finally, insert the padlock and lock when setup is completed.
For extra security, you can use the included cable to wrap around the tree
trunk as well.
1. Insert the end with the large lug into bracket A.
2. en, feed the other end of the cable around the tree and back through
the bracket.
3. Tighten the adjustable locking bolt to hold the cable tightly in place (B).
USING THE DIGITAL TRAIL SCOUT
A
B
B
Trail Scout 2008 Models 119835+119 19 3/4/08 12:05:29 AM