Filter
Top Products
10
(2) SET TIME: When the LCD shows the time, press the ENTER key to modify the time.
Press Up or Down button to select 1-12, then press ENTER to conrm the two
digit hour. en the cursor will move to the minute.
Press Up or Down button to select 0-59, then press ENTER to conrm the two
digit minute. From SET TIME, press the Down button to set the name.
(3) SET NAME: When the LCD shows current name, press ENTER key to modify the
name display. Press Up or Down button to select one character from “A” to “Z”,
“0” to “9”, ”_” , then Press ENTER to conrm, the cursor will move to next character.
ere are 2 lines of 8 characters each for your use. From Set Name, press the Down
button to change the password.
Set Date
09/18/04
Set Time
06: 30 PM
MY NAME
555_1234
Setup Guide (cont.)
When the LCD shows [Password Set], press the ENTER key to set the password.
Password
Set
(4) SET PASSWORD:
Note: See “Other Setup Notes” for details on the moon phase
stamp feature, which is linked to the date you set here.
(1) SET DATE: When the LCD shows the date, press the ENTER key to modify the date.
Press Up or Down button to select 1-12 then press the ENTER button to
conrm the two digit month. e cursor will then move to the day.
Press Up or Down button to select 1-31 then press ENTER to conrm the two
digit day. en the cursor will move to the year.
Press Up or Down button to select 0-99,then press ENTER to conrm the two
digit year. From Set Date, press the Down button to set the time.