Filter
Top Products
14
If the user chooses RIFLE mode, and after having determined unit of measure, the user has the following options:
1. Variable Sight-In (VSI™) - Allows the rifle hunter to choose from four sight-in distances (100, 150, 200, or
300 yards or meters) and provides holdover / bullet-drop data in inches, centimeters or MOA. The “SD” (Sight-
In Distance) indicator will turn on and the current Sight-In Distance number will blink within the display (I.e.
100, 150, 200, or 300). The Sight-In Distance options can be cycled through in a circular fashion by pressing and
releasing the mode button. Once the desired Sight-In Distance is displayed, select it by pressing and releasing the
power button.
2. And finally, if RIFLE mode was chosen, and as long as unit of measure and a sight-in distance was selected, you
have the option of determining how you would like hold-over / bullet-drop displayed. If measurement units are in
yards, you will be able to choose between inches, or MOA. The “CM” for centimeters or “IN” for inches will flash
in the display and the SETUP icon is still lit. Once the desired ballistic measure is displayed, select it by pressing and
releasing the power button. If units of measure selected previously was Meters, then your hold-over / bullet-drop will
automatically be displayed in centimeters.
DISPLAY BRIGHTNESS
Vivid Display Technology™ dramatically improves contrast, clarity and light transmission while increasing brightness
of the digital readout, making distance readings legible in low light environments.
There are four intensity settings to choose from and this is the last setting within the SETUP menu. Press the
MODE button for 3 seconds to get into the SETUP menu and continue pressing the power button until you
see “ ” for brightness flashing and SETUP Icon lit. The existing brightness setting will be flashing. Pressing the
Fusion_1600_ARC_Translated.indd 14 12/21/09 9:56 AM