Filter
Top Products
6
GETTING STARTED
INSERTING THE BATTERY
The battery compartment is located between the objective barrels. Simply remove the battery cap by rotating it
counter clockwise and insert a CR-123 3-volt lithium battery into the compartment negative end first, then replace
the battery cap.
NOTE: It is recommended that the battery be replaced at least once every 6 months.
SETTING THE DISPLAY FOCUS AND DIOPTER ADJUSTMENT
Before you begin using your laser rangefinder binoculars, a few simple, one-time adjustments should be made to
ensure that you can get sharp focus of objects by just using the main focus knob on the binoculars. This process will
compensate for any variations in the eyesight or vision of the individual user:
1. Leave the rubber eyecups in their “up” position if you are not wearing glasses, or twist them down if you are.
Grasp the left and right sides of the binocular, and pull them apart or push them together while looking
through the binocular to adjust the eyepiece spacing until your view is a single circular image.
2. While looking through the binoculars, press the power button to turn on the display. Look through just the
right side of the binocular-you will see a red aiming circle in the center. Point the binocular at a plain
background.
3. Rotate the display focus (right eyecup) until the circular reticle appears as sharp as possible to your right eye.
This compensates for any difference between your vision and the correct focus for the laser.
4. Next, continuing to look through the right side only, aim at a distant object (preferably one containing fine
detail such as a tree or sign), and adjust the binocular’s center focusing knob until it appears as sharp as
possible to your right eye.
Fusion_1600_ARC_Translated.indd 6 12/21/09 9:56 AM