Filter
Top Products
9
A. LOCAL Devices area:
IPEDIT will searching all IP Products 9XXXseries in the same local Ethernet, the default name of
9060A-MP (Mega Pixels) is Cam-location, and display the information as select
1. Double click the IP address, it will be covered by dark stripe, its name, and IP will be displayed
below. The IP address of IP camera 9060 should in the same subnet with your PC, subnet mask,
and default gateway mast same as 9060 also. For example, the IP address of 9060 is 192.168.10.9,
so your computer needs to add an IP address looks like 192.168.10.XXX to get connection to 9060.
2. User can change its name (please use numbers or letter) or IP (please set in the same subnet as
your PC) in the text windows. Then click Submit after setting finish. After about 20 seconds, the
new setting will work. Click Update, the new setting of equipment will display in text window.
Note:
* The default static dynamic IP address of IP 9060A-MP (Mega Pixels) is 192.168.0.100. If can not
get in the webpage by IP 9060 static dynamic address, please set the segment of IP 9060A-MP
(Mega Pixels) with your PC.
* You can get your PC network information – IP Address, Subnet Mask and Default Gateway by
step: start execute key “cmd” in dialog key “ipconfig” in MS-DOS mode