Filter
Top Products
74 • Additional Information
CANNOT USE DISC
USE OF A RECOMMENDED DISC IS
ADVISED
- The disc cannot be used. We
recommend that you use a disc that
has been tested ( 6).
CARD ERROR
- A memory card error occurred. The
camcorder cannot record or display the
image. The error may be temporary. If
the message disappears after 4
seconds and appears in red, turn
the camcorder off, remove the card and
reinsert the card. If changes to
green, you can resume recording/
playback.
CARD FULL
- Memory card is full. Erase some images
( 55) to free some space or replace
the memory card.
CHANGE THE BATTERY PACK
- Battery pack is exhausted. Replace or
charge the battery pack ( 18).
DISC ACCESS FAILURE CHECK THE
DISC
- There was an error when reading the
disc or attempting to write onto it. Try
cleaning the disc or replace it ( 77).
- This message can also appear if
condensation has formed. Wait until the
camcorder dries completely before
resuming use ( 79).
- The disc may not be loaded correctly.
Try removing the disc and reinserting it
( 26).
DISC COVER IS OPEN
- Verify the disc is correctly inserted and
close the disc cover ( 26).
DISC FULL
- The disc is full (“ END” appears on
the screen). Delete some recordings
(DVD-RW in VR mode) to free some
space ( 36) or replace the disc.
DISC IS FINALIZED
CANNOT RECORD
- You cannot record additional scenes on
a finalized DVD-R/DVD-R DL disc.
- You cannot record additional scenes or
unfinalize a DVD-RW disc in VIDEO
mode that was finalized with another
digital device.
DISC MUST BE FINALIZED TO PLAY
BACK IN COMPATIBLE PLAYERS
- Be sure to finalize the disc and check
the compatibility of the device before
playing back the disc on external DVD
devices ( 48).
LOADING THE DISC
- The disc is being read. Wait before you
start recording.
NAMING ERROR
- The folder and file numbers have
reached their maximum value. Set the
[FILE NOS.] option to [RESET] and
erase all the images on the memory
card ( 55) or initialize it ( 59).
NO CARD
- There is no memory card in the
camcorder ( 28).
NO DISC
- No disc is loaded. Insert a disc ( 26).
- This message can also appear if
condensation has formed. Wait until the
camcorder dries completely before
resuming use ( 79).
NO IMAGES
- No images are recorded on the memory
card.
PRINT ORDER ERROR
- You attempted to set more than 998 still
images in the print order ( 60).
REACHED THE MAXIMUM NUMBER OF
SCENES
- The maximum number of scenes has
been reached. Delete some recordings
(DVD-RW in VR mode) to free some
space ( 36) or replace the disc.
RECOVERING DATA
PLEASE WAIT…
- Data on the disc is being recovered.
Wait until this message disappears
before resuming use.
TASK IN PROGRESS DO NOT
DISCONNECT THE POWER SOURCE
- The camcorder is updating important
file allocation data on the disc. Do not
disconnect the compact power adapter
or remove the battery pack.
COPY