Filter
Top Products
Adjusting the White Balance
87
Manually Correcting the White Balance
You can manually correct the white balance when in S mode (p. 65). This
adjustment will have the same effect as using a commercially-available color
compensating filter.
Choose S.
Follow Steps 1 – 2 on p. 64 to choose S.
Choose the White Balance.
After pressing the m button, press the
op buttons to choose , then press the
m button.
Adjust the setting.
Move the zoom lever and adjust the
correction amount, B or A.
Press the m button.
If you change camera settings after recording white balance data, the tone
may not turn out properly.
• B stands for blue and A for amber.
• You can also manually correct the white balance by recording custom
white balance data (p. 86) and then following the steps above.
• Even if you change the white balance setting in Step 2 after making
adjustments in the correction level, those adjustments will be retained.
However, the adjustments will be reset if custom white balance data is
recorded.