Canon 20062 Digital Camera User Manual


 
CONTROLS IN DETAIL, CONTINUED
29. MODE DIAL ACCESS KNOB: Rotate to select the proper shooting mode, C1, C2 and C3 can pre programmed with personal parameter
and care should be taken to understand the various combination available
30. AF POINT SELECTOR / MAGNIFIER BUTTON: Push to select the AF pattern desired or to magnify the image on the rear LCD,
Spot, Center Weighted or Matrix metering options.
31. SET / MOVIE SHOOTING BUTTON Press to approve selection of menu or to engage the video recording mode.
32. ON/OFF & QUICK CONTRONL DIAL SWITCH LEVER: Rotate to turn on the camera and quick control dial
33. REAR WINDOW LCD: This port window allows viewing of the recorder images and is used in the Live View as well as the Video mode
for framing, a cutaway in the upper right corner allows the users to see the recording pilot light. Allow viewing of menus as well.
34. ERASE BUTTON: Press to delete images.
35. PLAYBACK BUTTON: Press to activate the monitor and review images.
36. INFO BUTTON: This button will activate the rear LCD and display all pertinent shooting information.
37. PICTURE STYLE BUTTON: Press to select the desired feature. (note: It is somewhat recommended to shoot in RAW format and
concentrate on these option in post production).
38. MENU BUTTON: Press to activate menu display, scroll using main or quick dial control knob and select using SET function button
39. LIVE VIEW ACTIVATING BUTTON: Press to engage the LIVE VIEW feature of your camera, this is the rst step in setting up the camera
for video shooting.
40. RUBBER ANTI SKID PADS: Four rubber pads are provided to protect the housing and preventing it from sliding on wet decks.
41. SACRIFICIAL ANODES: (2X) zinc anodes are installed to protect your housing against salt water corrosion; theses are made to deteriorate
easier than the other strategic part of your housing, hence the name sacricial anodes. These anodes need to be replaced by the user
as needed.
42. MOUNTING HOLES: Three 1/4” X 20 holes are provided for mounting strobes trays or accessories.
43. MOISTURE ALARM WARNING DIODE: Warning LED will light up in the unlikely event of water penetrating the housing.
page 4