Filter
Top Products
ENG-14
Changing the Operation Direction of Tilt and Shift (TS rotation Function)
When the tilt and shift are used in a parallel direction,
vignetting will occur in the areas marked in gray in the
following table.
In order to prevent shifts in position while shooting, shooting
while TS rotation is locked, or shooting per click position is
recommended.
By using the TS rotation function,
the relationship of the tilt and shift’s
operation direction can switch from
right angle to parallel.
Press the TS rotation lock release
button in the mounting direction while
the lens is mounted on the camera,
and then turn the tilt component.
● There are clicks at the 45° position, and
will be fixed in either the right angle or
parallel position.
8.5
8
7
6
5
4
3
2
45678910 11 12
8.5
8
7
6
5
4
3
2
45678910 11 12
8.5
8
7
6
5
4
67891011 12
6.5
6
5
4
3
2
67891011 12
6.5
6
5
4
3
789101112
6.5
6
5
4
3
891011 12
Tilt amount (Degree(s))
TS-E17mm f/4L TS-E24mm f/3.5L II
Shift amount (mm)
Imaging Area
Vertical
Horizontal
Diagonal
Tilt and Shift direction
02-7587_ENG 10.2.15 4:40 PM Page 14
COPY