Filter
Top Products
27
6
Set the master unit’s flash mode
to <a>.
For shooting, <a> will also be
set automatically for the slave unit(s).
7
Check that the flash is ready.
When the slave unit(s) is ready to fire
(fully charged), the AF-assist beam
will blink at 1-sec. intervals.
8
Check the flash operation.
Press the master unit’s test firing
button.
X The slave unit will fire. If the flash
does not fire, adjust the slave unit’s
angle toward the master unit and
distance from the master unit.
9
Set the camera and shoot.
Set the camera in the same way as
with normal flash shooting.
80°
8m (26.2ft.) 12m (39.4ft.)
Indoors
Outdoors
Sample wireless flash setup
Master unit such as
Speedlite 580EX II
Slave A
(430EX II)
Slave B
(430EX II)
A81_03.fm Page 27 Thursday, February 14, 2008 11:48 AM
COPY