Filter
Top Products
14
You can adjust the flash output as easily as normal exposure
compensation. Flash exposure compensation can be set up to ±3 stops
in 1/3-stop increments. (If the camera’s exposure compensation is set in
1/2-stop increments, flash exposure compensation is set in 1/2-stop
increments.)
1
Press the <8> button until the
<f> icon and compensation
amount start blinking.
2
Set the flash exposure
compensation amount.
Press the <9> button to set the
amount.
To cancel the flash exposure
compensation, set the amount to +0.
3
Press the <8> button.
X The flash exposure compensation
amount will be set.
This is for setting various numeric settings. Pressing the <6> (plus)
button increases the number, while the <5> (minus) button decreases
the number.
fFlash Exposure Compensation
Using <9>
If flash exposure compensation has been set with both the Speedlite and
camera, the Speedlite’s flash exposure compensation amount will override
the camera’s.
A52_E.book Page 14 Friday, June 10, 2005 4:40 PM