Filter
Top Products
8
Install four size-AA batteries.
1
Open the cover.
Slide the battery compartment cover
as shown by the arrow and open it.
2
Install the batteries.
Make sure the + and – battery
contacts are correctly oriented as
shown in the battery compartment.
3
Close the cover.
Close the battery compartment cover
and slide it as shown by the arrow.
Recycling Time and Flash Count (with size-AA alkaline batteries)
Based on new size-AA alkarine batteries and Canon’s testing standards.
Installing Batteries
Recycling Time (Approx.)
Flash Count (Approx.)
Normal Flash
0.1 - 3.7 sec. 200 - 1400
Since the shape of their contacts is not standardized, using non-alkaline
size-AA batteries may result in faulty battery connection.
Use four new batteries of the same brand and type. Do not mix battery
types. When replacing batteries, replace all four batteries at the same time.
Size-AA Ni-MH or lithium batteries can also be used.
A52_E.book Page 8 Friday, June 10, 2005 4:40 PM