Filter
Top Products
34
T Program AE
4
Take the picture.
•
Compose the shot and press the
shutter button fully.
The Difference Between <T> and <Y>
• The shutter speed and aperture value are set in the same way in
both modes.
• The following features can be used in the <T> mode, but not in
the <Y> mode.
About Program Shift
• In the Program AE mode, you can freely change the shutter speed
and aperture value combination (program) set by the camera while
retaining the same exposure. This is called program shift.
•To shift the program, press the shutter button halfway and turn the
<l> dial until the desired shutter speed or aperture value is
displayed.
• Program shift is canceled automatically after the picture is taken.
• Program shift cannot be set when the built-in flash is used.
· Manual selection of AF mode
and AF point
· Film advance mode selection
· Program shift
· Exposure compensation
· AEB
· Custom Function
· Depth-of-field preview
·
AE/FE lock with the <j> button
· Multiple exposures
· Built-in flash manual firing and
flash OFF
· High-speed sync
(with EX-series Speedlites)
• If “ ” and the maximum aperture value blink, it
indicates underexposure. Use flash.
• If “ ” and the minimum aperture value blink, it
indicates overexposure. Use an ND filter to reduce
the light entering the lens.