Canon 310 HS Digital Camera User Manual


 
Active Display
29
z Pressing the 1 button again while the
lens is retracted will turn off the power.
When an image is displayed, lightly tapping the camera as shown below will
switch to the next image.
Switching to Shooting mode
Pressing the shutter button halfway while in Playback mode switches the camera
to Shooting mode.
Be sure to put the strap around your wrist, and hold the camera firmly to
avoid dropping it.
Depending on the way you tap the camera, images may not switch.
Active Display
Tilt the camera to switch images
If you touch and hold q on the left of the screen and tilt
the camera as shown while switching through images
(p. 28), the images advance quickly. Tilt the camera in
the opposite direction while holding r.
While dragging an image, if you touch and hold q or r the image will
appear coarse.
Switch to next image Switch to previous image