Filter
Top Products
228
With the AC Adapter Kit ACK-E10 (sold separately), you can connect
the camera to a household power outlet and not worry about the
remaining battery level.
1
Connect the power cord.
Connect the power cord as shown in
the illustration.
After using the camera, unplug the
power plug from the power outlet.
2
Connect the DC Coupler.
Connect the cord’s plug to the DC
Coupler.
3
Insert the DC Coupler.
Open the card/battery compartment
cover and insert the DC Coupler until
it locks in place.
4
Push in the DC cord.
Open the DC cord hole cover and
install the cord as shown.
Close the card/battery compartment
cover.
Using a Household Power Outlet
Do not connect or disconnect the power cord while the camera’s power
switch is set to <
1>.
COPY