Filter
Top Products
310
d Transferring Images to a Personal Computer
3
Set the camera’s power switch to
<1>.
When the personal computer displays
a screen to select the program, select
[EOS Utility].
X The EOS Utility screen will appear on
the personal computer.
For RAW+JPEG images, you can specify
which image to transfer. On the next
page in step 2, select [RAW+JPEG
transfer], and select the image to be
transferred: [JPEG only], [RAW only], or
[RAW+JPEG].
3 Transferring RAW+JPEG Images
After the EOS Utility screen appears, do not operate EOS Utility. If any
screen other than EOS Utility’s top screen is displayed, [Direct transfer] in
step 5 on page 312 will not be displayed. (The image transfer function will
not be available.)
If the EOS Utility screen does not appear, refer to the Software
Instruction Manual (CD-ROM, p.396).
Before disconnecting the cable, turn off the camera. Hold the plug (not
the cord) to pull out the cable.
COPY