Filter
Top Products
65
A Fully Automatic Shooting (Scene Intelligent Auto)
4
Take the picture.
Press the shutter button completely to
take the picture.
X The captured image will be displayed
for 2 sec. on the LCD monitor.
The focus confirmation light <o> blinks and focus is not
achieved.
Aim the center of the Area AF frame over a zone with good contrast, then
press the shutter button halfway (p.44). If you are too close to the
subject, move away and try again. If focus cannot be achieved, the AF
status indicator <e> will also blink.
Multiple AF points light up simultaneously.
All those AF points have achieved focus. As long as the AF point
covering the desired subject lights up, you can take the picture.
The beeper continues to beep softly. (The focus confirmation
light <o> does not light up.)
It indicates that the camera is focusing continuously on a moving subject.
(The AF status indicator <e> is displayed, but the focus confirmation
light <o> does not light up.) You can take sharp pictures of a moving
subject.
Note that focus lock (p.67) will not work in this case.
Pressing the shutter button halfway does not focus the subject.
If the focus mode switch on the lens is set to <MF> (Manual Focus), set it
to <AF> (Autofocus).
FAQ
The <A> mode makes the colors look more impressive in nature, outdoor,
and sunset scenes. If you did not obtain the desired color tones, change the
shooting mode to <d/s/f/a>, set a Picture Style other than <D>,
then shoot again.
COPY